Elite dangerous resistance cap generator#
Elite dangerous resistance cap mods#

In many cases, 50-60% is a good sweet spot.Д«eware though that 40% of a Plasma Accelerator's damage ignores resistances. Resistances from multiple sources are calculated as multiple damage multipliers - a 20% booster and a 30% booster would give you a damage multiplier of 0.8 * 0.7 = 0.56.Д«eyond 50% resistance, there are diminishing returns - achieving 70% resistance is very hard, and 75% is mathematically impossible even if you had a million shield booster slots.

A 100 Mj shield with 50% resistances would be able to absorb the same amount of damage, but would only take 50 seconds to fully recharge.

A 200 Mj shield with 0% resistances would take around 100 seconds to fully recharge.

If you increase your damage resistance from 0% to 50%, you take half the damage which effectively doubles your shield strength.ДЄ consequence of the damage reduction is that your effective shield recharge rate is increased as well: BUT if you are bounty hunting, Then bi-weaves with shield cell banks to keep them up.Bi-weaves charge much faster ,just wait a few seconds between fights and your good to go.Yep, that's basically how it works.

So you recommend Bi Weaves, boosters, and shield cell banks? What advantage does that have over normal 6A shields in battle does the Python naturally 'work better' with bi weaves? If you are just mission running or cargo hauling,I recomend 6 A thermal resistant shields with no shield cell banks because you need the cargo space. Adjust them so your resistance is at least 50 to 60+ % across the board or as close as possible then put on a heavy duty if possible. Get grade 5 asap.Your boosters is where your strength comes in. But both ships have thermal resistant shields and the weapon loadout just varys with my mood.

My other pvp python runs a class 5 prismatic with 3 class 6A shield cell banks for a total of 12 shots. When I want to do combat in the python I change to bi-weaves and shield cell banks, THAT is what makes the python shine in combat is it's ability to sustain shields and it's firepower. I have 2 pythons ,One is a mission runner with a 6A with 4 boosters ,there is no need for point defenses b/c IF and WHEN I run across missiles, my explosive resistance is 68 % so with every 3 missile hits I only take the damage equivalent of one.

Elite dangerous resistance cap mods#

Originally posted by WRONGTURN:You didn't say what your mods were. So you recommend Bi Weaves, boosters, and shield cell banks? What advantage does that have over normal 6A shields in battle does the Python naturally 'work better' with bi weaves? Shield boost mods I have on the 6A are just overall strength boosters. Is there anything else I can do to make it stronger (of course I can get level 5 mods but I haven't unlocked that engineer yet).

Elite dangerous resistance cap generator#

My 6A generator is engineer modded to class 3, but I feel like I'm doing something wrong. I have a 6A generator and 2 shield boosters. Originally posted by в™Ґв™Ґв™Ґв™Ґв™Ґв™Ґ alert:Hi guys, my Python's shields seem to get ripped apart very quickly by equal and even lower class ships.